Thursday, 3 January 2013



MT65x3 USB VCOM drivers.7z

SP Flash Tool v2.1134.00.7z 



0. Charge your phone fully
1. Place all the files you downloaded to your Desktop.
2. Extract files from the Drivers archive to your Desktop.
3. Install the Drivers you got from the archive.
4. Extract files from the SP Flash Tool archive to your Desktop.
5. Double-click on the Flash Tool executable file and it should launch.
6. In the tool, click on Scatter-loading button and select the Scatter file you downloaded earlier.
7. A list of files will appear on the screen, make sure only BOOTIMG option is selected. Uncheck other options.
8. Double-click on BOOTIMG in the Flash Tool and select the boot.img file you downloaded earlier.
9. Go to Options and enable the USB Mode option.
10. Turn OFF your device.
11. Pull the battery out of the device.
12. Put it back into the device, but do not turn it ON.
13. Connect the device to your PC using the USB cable.
14. Windows will automatically install the drivers for your device.
15. Once drivers are installed, unplug the device from your PC.
16. Remove the battery from the device.
17. Put it back into the device but don’t turn it ON.
18. In the Flash Tool, click on Download button.
19. A counter should start running in the tool and when so happens, connect the device to the PC.
20. It will then flash the file to your device.
21. Once flashing’s done, disconnect the device from the PC.
22. Pull the battery out of the device.
23. Put it back into the device.
24. Turn the device ON normally.
25. Once turned ON, go to Menu>>Settings>>Applications>>Development>>USB debugging and tick-mark the box.
26. Connect the device to your PC via USB cable.
27. Extract files from the Unlock Root archive to your Desktop.
28. Double-click on the Unlock Root executable file and it should launch.
29. Click on ROOT button in the tool and let it root the device.
30. Once rooting’s done, reboot the device.


Post a Comment